Electric Recovery Winch 8000 lbs 5.5HP 12V Handheld Remote Switch

Features:

- 8,000LBS (single line rated pull) Electric Winch
- Efficient three-stage planetary gear train helps to offer powerful horsepower
- 4-way roller fairlead to guide the rope onto the drum evenly
- Free spooling clutch allows the wire rope to be pulled out without using electric power
- Power IN and OUT through a remote switch with 12ft lead
- Convenient and safety design with button for switch from wired to wireless control
- Automatic braking in the drum will lock the wire rope and stop pulling when you release button on the switch
- Extra protective casings for connectors, insuring safety and low wear-out
- Custom gaskets seal up critical inner components from water and debris infiltration

Specifications:

- Single Line Rated Pull: 8000 lbs (3629 kg)
- Motor: 5.5hp/4.0kw (12V), Series Wound
- Gear Reduction Ratio: 148.2:1
- Gear train: 3 Stage Planetary
- Fairlead: 4-Way Roller Fairlead
- Clutch: Sliding Ring Gear
- Braking Action: Two way braking action in the drum
- Remote Control: Wired
- Control: remote switch with 12ft (370 cm) lead
- Drum Size (Dia. x L): 2 1/2" x 8 13/16" (64 x 224 mm)
- Cable Size (Dia. x L): 5/16" x 92' (8.1mm x 28m)
- Battery Recommended: 650CCA minimum for winching
- Battery Lead: 2 gauge, 72" (183 cm)
- Overall Dimension (LxWxH): 21 1/8" x 6 5/16" x 8 9/16" (537 x 160 x 218 mm)
- Mounting Bolt Pattern (LxW): 10" x 4 1/2" (254 x 114.3 mm)
- Weight: 73.7 lbs (33.5 kg)

Package Contents:

- 1x 8000lbs Winch
- 1x Solenoid Box Assembly
- 1x Roller Fairlead
- 1x Remote Switch with 12ft Lead
- 1x Hook
- 1x Safety Pull Strap
- 1x Battery Lead
- 1x Set of Fixing Accessories
- 1x Manual

Notice:

- Mounting plate is not included. You need a suitable winch mounting plate to hold your winch and fairlead before installing the winch onto your vehicle. (The type of mounting plate should refer to if your vehicle equipped with a fender guard or not.)
- Do not use winch as a hoist, do not use for transportation of people.
- Do not operate and spool under full load over one minute continuously.
- While motor is over heating, please stop for a while to cool down.