BM800 Pro Condenser Microphone Kit Shock Mount Audio Cable Anti-wind

Features:

- Cardioid condenser microphone with narrower and focused front pickup angle, reducing unnecessary noise and interference echo from the side and the back, improving the isolation of the required sound source
- Low self noise - equivalent noise level of 16dBA, means low noise from microphone itself

Specification:

- Overall Dimension(Dia. x L): 1 13/16" x 5 7/8" (46 x 150 mm)
-Frequency Response: 20 Hz to 16 kHz
-Sensitivity: -38 dB±2 dB (0 dB=1 V/Pa at 1 kHz)
-Output Impedance: 150 Ω±30% (at 1 kHz)
-Load Impedance: ≥1000 Ω
-Equivalent Noise Level: 16 dBA
-Maximum Sound Pressure Level: 132 dB (at 1 kHz≤1% T.H.D)
-Signal Noise Ratio: 78 dB
-Normal Working Voltage: 5 to 9 V
-Supply Voltage: 5 to 48 V
-Electrical Current: 3 mA
-Net Weight of Microphone: 0.70 lbs (316 g)
-Cable Length: 98 7/16" (2.5 m)
-Cable Plug Size(Dia.): 3.5mm
-Material: Metal

Package Content:

- 1x Condenser Microphone
- 1x Shock Mount
- 1x Audio Cable
- 1x Anti-Wind Foam Cap
- 1x Manual

Notice:

- Please note that the microphone stand and pop filter in the pictures are not included.
- This microphone is not compatible with Apple computer. If you want to use our microphone on Apple computer, an external sound card must be equipped. Please purchase an external sound card if needed.
- In general, the rated voltage of desktops and portable machines is 3V, while our microphone's voltage should be above 5V.
- It's highly recommended to use this microphone with an external audio card for best performance.
- Mobile phone cannot be used as the power supply for our microphone, please do not use it on your phone.